Home / News / Product News / ST2 Multi-Zone System Launched: One House, Every Room Its Own Music (Video)

ST2 Multi-Zone System Launched: One House, Every Room Its Own Music (Video)

2026-11-18 · Product News

The ST2 multi-zone background music system is how SNAIL POWER turns whole-home music from one host plus a handful of speakers into an expandable zone system. What it solves is not whether music can be heard, but whether every room can hear its own thing: one host runs one zone, several hosts pair freely with each other (the existing ST1 / SR1 is the previous generation on the same background music chain), and zones can keep being added.

Let us put the conclusion up front: the value of this setup is not in its audio specs but in the word zone, because that single word decides whether the system is for one room or for a whole house.

SNAIL POWER background music system
The BMmini background music family: ceiling-mounted and recessed, IP45 rated, usable in damp spaces such as kitchens and bathrooms (Image source: SNAIL POWER official site)

1. What it is: a music system you can split by room

Traditional background music is one amplifier driving every speaker at once: music in the living room, and the bedroom, the kitchen and the bathroom all play along, with one volume for the lot. ST2 goes the other way: each zone is controlled and plays independently, several hosts pair freely with one another, and the number of zones follows the house rather than the host.

  • Independent zones: different zones can play different content, with volume and source separate for each.
  • Expandable: add a host and you have one more zone, without replacing what is already installed.
  • One app for all of it: control works on iOS and Android alike, and moving between zones needs no second remote.

2. Nine scenes, made for people who will not fiddle

The most common failure in background music is not poor sound, it is a system nobody uses, because every listening session means choosing a device, choosing a source and setting a volume. ST2 turns that into scenes: 9 preset playback scenes, with the playlists you actually listen to bound to zones and recalled with one touch.

Scene typeTypical useWhy it is needed
Cooking / bathingKitchen and bathroom, sound that carries over running water and a range hoodDamp rooms put demands on ingress protection
Wine tasting / workoutDining room, balcony, gym corner, playlists chosen for the tempoDifferent moments want a different mood
Sleep / away standbyA sleep timer in the bedroom, whole-home standby in one pressFewer manual steps every single day

Scenes can be customized: bind a playlist to a zone, and the next press returns you to exactly that state. In a household with elderly parents and small children, this counts for more than sound quality.

3. Connectivity and transmission: why it gets through walls

The second big problem in background music is signal. This system gives three numbers, and numbers are more use than adjectives:

ConditionStable transmission distanceNotes
Open, nothing in the wayabout 50mLarge single-floor apartments, one floor of a villa
Through one wallabout 25mLiving room to master bedroom
Through two wallsabout 15mCrossing floors usually needs a relay
  • Sources: AUX in and out, Bluetooth reception, USB local playback (MP3 / WMA / APE / FLAC), AirPlay and Android casting, DLNA / QPLAY streaming services.
  • Independent treble and bass compensation per channel: rooms differ in absorption and in volume, so one EQ stretched across a whole house will leave some zones muffled and others thin.
  • Voice control: switch a scene with a sentence, without reaching for a phone.

4. Protection: what IP45 means on the BMmini

Background music has to go into kitchens and bathrooms, so ingress protection is not a bonus, it is the entry requirement. BMmini reaches IP45: dust protected (a small amount of dust does not interfere with operation) plus splash protection (water splashed from any direction causes no damage).

It should be said plainly, though: IP45 is splash resistance, not immersion protection. Directly beneath a shower, or in a sauna where heat and humidity never let up, still has to be avoided or covered with a protective housing.

5. Cost and limits (know these before you buy)

  • Zones are not free. Each zone needs a host, a power run and a set of speakers; splitting into 8 zones means 8 sets of that cost.
  • Walls decide the result. Load-bearing walls and metal ceilings weaken the signal, and crossing floors usually needs an extra relay.
  • The host is not waterproof. BMmini is IP45; the host and its power supply still have to sit somewhere dry and ventilated.
  • Scenes need someone to set them up. The 9 scenes are templates, and playlists and zones have to be bound once to the way your home actually runs, otherwise you are back to picking songs by hand.
  • A finished house means new cut-outs. Ceiling speakers are either cut in now or surface mounted, and there is no third path.

6. The one-line call

If all you need is music in the living room, an ordinary amplifier is enough; if you want every room to play its own thing and to keep adding rooms, a zone system like ST2 is the right road. The test is not sound quality, it is whether you will add another zone within three years.

Related reading: Multi-zone villa cinema: how to divide the living room, the media room and the yard; Living room cinema plans: what changes between 30 sqm and 60 sqm.

Official launch video (WeChat Channels): ST2 Multi-Zone System Official Launch. For exact model specifications and pricing, refer to the product pages and the official launch.


Related articles

END

#BackgroundMusic #MultiZone #WholeHomeAudio #BMmini #SmartHome #SnailPower

Written by Digital Xiaoniu, first published on the SNAIL POWER official site, Product News.