Home / News / Featured Projects / Luxury Homes: 10 Seconds Inside a Finished SNAIL POWER Living Room (Video)
Luxury Homes: 10 Seconds Inside a Finished SNAIL POWER Living Room (Video)
2026-11-15 09:05 · Featured Projects
Concealed cinema speakers are the living room cinema speakers approach that leaves 100mm of clearance in the ceiling, cuts Ø90mm round holes in the drywall, hides five CW90 units inside, and adds a W10 subwoofer to handle the low end. The CW90 has a Ø90mm cut-out, a Ø105mm faceplate and a 100mm height, is rated at 90W per unit and delivers 111dB sound pressure, and the full package is ¥17,200, that is, from ¥17,200. What it solves is "no cinema system visible in the living room once the install is done", and the precondition is that the ceiling is still in the construction stage.
Key points
- The 10-second video shows the result: after the install, the living room is still a living room.
- The contradiction in a luxury living room is not budget: it is that "we want the effect" and "it must not turn into an equipment room" have to hold true at the same time.
- The solution is to move the boxes into the ceiling: a Ø90mm cut-out, a Ø105mm faceplate, 100mm of clearance, in the same row as the downlights.
- Four costs: the ceiling has to allow the work, the window opens only once, the configuration cannot be changed, and the low end needs a patch of floor.
- Do not do it in older homes with no ceiling to cut, in aluminum panel ceilings, or on a budget under ¥20,000.
1. A 10-second video of a living room that is "done"
Shot vertically, 10 seconds long. What the video shows is a finished living room; a finished job should look like this — no sign that anything was torn open.
Those 10 seconds give no installation information: where the boxes sit and how the cable runs are on the drawings, not in the final cut. For that part, a speaker layout plan is more useful than a short video.
What decides success is the sequence: design before purchase, purchase before the boards go up, boards before the holes are cut. Change the order once, and delivery turns from "installing" into "rescuing".
The cost: 10 seconds can prove how it looks, not how it sounds. Appearance can be signed off the same day; the sound takes half an hour in the seat — the low end especially, where the room and the subwoofer position matter more than the speakers.
2. The luxury living room contradiction: three bills, all paid by the house
The more expensive the house, the more the living room has to do: receiving guests, children running around, watching films, listening to music. One room has to reconcile "looking respectable" with "being able to make sound". A small apartment can compromise; a luxury living room is there to be looked at.
The requirements of a 5.1 system are fixed: three units on the screen side, two above and behind the sofa, one subwoofer on the floor, plus an AV receiver. Lay that out in traditional form in a living room and the result comes down to one phrase: the gear shows.
So what these owners want is often described wrongly: they are not asking for a "cinema", they are asking for "no sign that a cinema was installed".
Home theater design is really answering "what does this room gain once the install is done". Gaining four pieces of furniture and a run of exposed cable is one answer; gaining a few circles the same size as the downlights is another.
Floorstanding speakers put their bill on the floor: a patch given up on each side of the TV wall, plus distance kept from the rear wall; the two surround units at the sofa go on the wall or on stands, so the living room gains four pieces of furniture.
Surface-mounted and on-wall speakers put their bill on the walls. Drill stone or wood veneer and there is no going back; the boxes, together with the cable behind them, leave a group of things on that wall that is hard to ignore.
The projection screen puts its bill on daylight. Luxury living rooms often treat a large window as the main view; hang a fixed-frame screen and it blocks a stretch of it, and a drop-down screen takes another box in the ceiling. Projection wants dark, the living room wants light, and the two rarely hold at once, which is why most living rooms choose a TV plus in-ceiling speakers.
Admit the boundary: in a house with a dedicated media room, none of these three bills applies — a dark room was prepared for exactly this traditional form.
The cost: all three routes touch the house — floor, walls, ceiling. If none of the three may be touched, all that is left is a soundbar, and a soundbar builds its rear image by reflection, so it falls apart as soon as you move off center.
3. The concealed approach touches the ceiling layer
This approach moves a layer, not a dimension: the boxes move from the "room" layer into the "ceiling" layer, and all that is left in the room is a few holes.
The three numbers are only accurate read together: a Ø90mm cut-out, a Ø105mm ring left visible on the ceiling face after install, and a 100mm body height that needs the same clearance inside the ceiling. The faceplate has to sit flush with the ceiling surface, be skimmed and finished, and follow the color of the downlights beside it.
Lining up with the downlights is the real reason it gets accepted. With one more Ø105mm circle in a row of light positions, the eye does not try to work out which one is not a light — that is what concealed cinema speakers actually mean.
The driver is a 2.75-inch full-range plus a passive radiator; the mid and high frequencies and the imaging are its job, and the low end is handed to the W10. 90W per unit and 111dB describe how far it can reach; the low-frequency limit is not very low — the driver size is what it is, and that is decided by the structure.
The wired version runs its cable before the boards close; if you do not want wiring, or you already live in the house, take the wireless version on a dedicated 5.8G channel. What wireless saves is the cable, not the work: power, positions, cut-outs and clearance all still have to be fixed before work starts.
| Item | Value | What it governs in the living room |
|---|---|---|
| Cut-out diameter | Ø90mm | The hole to cut in the ceiling; decides whether it can hide |
| Faceplate diameter | Ø105mm | The ring left visible on the ceiling face after install |
| Body height | 100mm | The clearance needed inside the ceiling; 1cm less and it will not go in |
| Rated power | 90W per unit | 450W across five units; sets the sound pressure headroom |
| Sound pressure | 111dB | How far it reaches on big dynamics |
| Transmission | Dedicated 5.8G channel | No speaker cable in the wall, and no crowding of the home Wi-Fi |
| Full package price | ¥17,200 | 5× CW90 + W10 subwoofer + MS-1 |
The cost: once the hole is cut, the position is fixed. Framing, light positions, air vents and access panels have to be laid out on the same ceiling drawing; if the skimming and finishing is done badly, that ring becomes the first thing seen on the ceiling.
4. Three extra things a luxury home brings: multiple floors, integration, multiple rooms
Multiple floors. A ground-floor living room, a first-floor sitting area, a basement media room: one 5.1 system cannot cover two floors; a dedicated 5.8G channel passes through walls less well than 2.4G, so do not expect one player to run two floors.
Smart home integration. Powering on, dimming the lights and drawing the curtains compressed into one scene, over a mainstream smart home ecosystem (voice assistant) or TCP/IP and serial control. The precondition is leaving the control ports during the fit-out: retrofitting a network port later is harder than speaker cable.
Multi-room background music. A cinema is listened to sitting down, background music is listened to while walking around: a cinema wants imaging, background music wants even coverage, and pressing both into one set of speakers suits neither end.
On certification, only the facts: Dolby Atmos and DTS:X certification in progress. Anyone who says the approval has been granted should show the document.
| System | Configuration | Official package price |
|---|---|---|
| CW90 wireless cinema | 5.1 cinema and karaoke: 5× CW90 + W10 subwoofer + MS-1 | ¥17,200 |
| IW3max | 5.1 cinema and karaoke: 5× IW3max + B28 subwoofer + AV-700 III + MU-1 | ¥23,600 |
| IW6 WIDE | 7.1 concealed: 3× IW6LCR-II + 4× IW6max + S10D subwoofer | ¥44,800 |
| X Series 5.1.2 | 10–25 m², C110 subwoofer | from ¥79,900 |
The cost: all three are decided at the drawing stage, and all three consume extra positions and budget; if everything is pressed onto the cinema, background music and multi-floor integration can only be pushed back.
5. The costs: ceiling, window, configuration, low end
Four of them, and not one can be avoided.
The ceiling has to allow the work. Drywall can be cut; integrated ceilings, aluminum panel ceilings and cast concrete slabs cannot. The body is 100mm high, so 100mm of clearance has to be left — 1cm less and it will not go in.
The window opens only once. Cabling runs between the electrical and carpentry stages, the holes are cut around the time the boards close, and skimming and painting finish it off. Change something after the boards are closed and it means patching boards, skimming and repainting, with the schedule counted in weeks. If you already live in the house, go wireless — but cut-outs and power still have to be settled before work starts.
The configuration cannot be changed. Whatever configuration ships from the factory is the configuration you keep: wanting two more surrounds for 7.1 is not as simple as "adding one more box". If it has to be 7.1, step up to the IW6 WIDE at ¥44,800; if the living room is larger and 5.1.2 is the target, the X Series starts at ¥79,900 — that is another system, and the home theater design has to be redone as well.
The low end needs a patch of floor. The W10 is a floor-standing subwoofer: on the floor it takes space, and it needs power. The subwoofer is the one link in the package that really does travel to the floor below. If the floor below is especially sensitive, a floating floor is more effective than changing the speakers.
Put plainly, the cost is one sentence: what you buy is "how it looks once it is done", and a good part of what you pay belongs to the construction window and the ceiling conditions.
6. Who should not do it, and a one-sentence summary
Three cases do not fit: older homes with no ceiling to cut; aluminum panel, integrated or stone-clad ceilings that cannot take holes; and budgets under ¥20,000 — the ¥17,200 is equipment only, and cutting, carpentry, skimming and tuning are billed separately, so that money has to be set aside.
The fit is just as clear: still in the fit-out stage, 100mm of clearance available, a living room that has to look respectable yet also needs rear imaging, and no major changes planned for eight to ten years. The order is positions first, then cut-outs, and only then the model.
Back to the definition from the opening: a living room cinema speakers approach that leaves 100mm in the ceiling, cuts Ø90mm round holes, hides five CW90 units and adds a W10 to take the low end, from ¥17,200.
The judgement this 10-second video offers is: only when nothing shows after the install does the sound get to speak; and whether nothing shows is mostly decided before the packaging is opened.
To close on the cost: the money is spent where it cannot be seen — inside the ceiling, before the boards close, on the drawings. The exit conditions are written plainly too: the ceiling cannot take holes, the budget is under ¥20,000, or the house changes within two years — meet any one of those three and do not go further.
Related articles
- A Musician's Living Room CW90: The Muzijun Install (Video)
- What It Looks Like When It's Done: CW90 Wireless Living Room (Video)
- Six-Metre Ceiling, 5.1 Done: An IW6 WIDE Handover Diary (Video)
END
#LuxuryLivingRoom #InCeiling #CW90 #NoExposedCables #FitOutStage #ClassicCases
Written by Digital Xiaoniu, first published on the SNAIL POWER official site, Classic Cases.